Metal Coat

The MPF 3350 Powder Feeder is specifically designed for thermal spray coatings. Its small size makes it a portable powder feeder, which can be carried to site for job work. The unit is controlled to extremely precise and repeatable feed rates. The powder hopper (canister) is mounted on a hingedplate which allows users to easily remove excess powder and clean the interior. Separate powder feed and carrier gas controls make it simple to clear excess material throughout the spray system. Remote operation switch can be added to any gun.

Working Operation

The feeder operates on a constant volumetric feed principle. At the bottom of the pressurized canister, there is powder carrier disk having slotted wheel mounted off center with respect to the canister. A given volume of powder its into each slot and as the disk rotates past the exit port the powder is fed into the powder hose and then to the spray gun by an inert carrier gas such as Nitrogen. The powder feed rate is directly proportional to the powder disk rpm which can be controlled from the front panel.

Features

• Large canister capacity.
• Low wear and maintenance requirement.
• It has a digital display which ensures correct readings
• Remote or Local powder feed control selectable.
• Sensor less vector control technology for accurate RPM control.
• It is compatible to a wide range of thermal equipment such as Plasma, HVOF System and Combustion Powder Flame spray systems.
• This unit is provided with powder pressure gauge to regulate the pressure accurately.
• Safety Valve is provided to release high canister pressure when required.