Metal Coat

The 5PM-II is a very economical and versatile, handheld, Powder Spray Gun for combustion powder spray that can be used to apply coatings for a variety of applications such as surface repairs, dimensional restoration, corrosion protection and wear resistance. With its built in powder feed canister, a thermal spray system utilizing the 5PM-II gun is an excellent choice for shops with occasional surfacing activity or when an economical investment is required. The 5PM-II is suitable for all-purpose use in that it can apply a wide range of coating materials such as self-fluxing alloys, ceramics, self bonding materials and conventional materials such as steels, stainless steels, bronze, aluminum-based and nickel-based alloys.

Designed for handheld operation, the 5PM-II is lightweight and employs a ‘pistol-grip’ handle for operator comfort and safety. A tool post fixture is also included to rest the gun during work piece changeover or for machine-mount operation.

Properties of Coating Powders

When a material is flame-sprayed, a new and different material is created. This is the reason that quality of coating depends upon quality of powder. A slight variation in powder chemistry can greatly influence the property of final coating. The particle size distribution in a powder can affect the density and porosity of the coating. Our Powders meet tough standards on chemical composition, particle shape & size, flow rate & purity.

Standard Accessories
Air Jet Assembly

If additional workpiece cooling is required or if denser, harder coatings are desirable, the 2PSA Air Jet Assembly is available. Designed for attachment to the front of the 5P-II gun, it injects high velocity air into the spray stream. Adjustable cooling tubes can be focused towards any part of the spray stream or directly onto the workpiece.

Vibrator
For certain fine materials or powders that are not freely flowing, the 5PM Vibrator is available in single phase 220V AC/110 VAC

Extension Nozzle
Extension Nozzle for the 5PM-II gun permit coating of interior bore diameters and surfaces, and are available in three standard
lengths:
305mm - 1 Feet
610mm - 2 Feet
910mm - 3 Feet

Special Features

• Rugged design: built for long service life with limited maintenance.
• Simple operation: requires minimal operator training.
• Wide range of coating materials: can be used for a variety of surfacing applications, including ceramic materials.
• Choice of fuel gas: allows spray operations to choose between acetylene or hydrogen.
• High spray rates and deposit efficiencies: applies coatings quickly and economically.
• Light weight and well-balanced: designed for handheld operation, unloaded canister and without hoses, with a comfortable ‘pistol grip’ handle design.
• Integrated powder feed canister: eliminates the need to purchase a separate powder feeder.
• Smooth powder feed: ensures consistent, quality coatings
• Powder flow control knob: mounted on the gun for convenient powder feed rate adjustment.
• Powder feed trigger: provides simple powder feed start and stop.
• Powder canister bayonet mount: locks the canister on tightly to prevent spills.
• Mounting stud: for machine mounted operation or use as a gun rest during workpiece changeover.
• O-ring seals between nozzle and siphon plug: ensures safe and reliable operation without the risk of backfire and simplifies gun maintenance.
• Choice of air caps: optimizes cooling during spray operations for a variety of coatings.
• Onboard gas valve: for simple oxygen and fuel gas flow start and stop.

Flame Spray Powder Spray Gun 6PM-II

The 6PM-II spray guns can be used to apply premium coatings to solve many surface problems including machine element repairs, dimensional restoration, corrosion protection, abradable and wear resistance.

Economical to operate, the 6PM-II series guns have high spray rates with low gas consumption and high deposit efficiencies can be achieved. These guns are also simple to learn to operate and maintain.

The 6PM-II gun series is suitable for all purpose use in that it can apply a wide range of coating materials such as self-fluxing alloys, ceramics, self-bonding materials and conventional materials such as steels, stainless steels, bronze, aluminum and nickel alloys.

A consistent and accurate supply of powder is fed from the MPF-700 Powder Feeder to the gun allowing you to mount or manually spray in virtually any position without affecting the powder feed rates.

Special Features:

• Rugged design: built for long service life with limited maintenance.
• Simple operation: requires minimal operator training.
• Wide range of coating materials: can be used for a variety of surfacing applications, including ceramic materials.
• Choice of fuel gas: allows spray operations to choose between acetylene or hydrogen.
• High spray rates and deposit efficiencies: applies coatings quickly and economically.
• Light weight and well-balanced: designed for handheld operation, unloaded canister and without hoses, with a comfortable ‘pistol grip’ handle design.
• Integrated powder feed canister: eliminates the need to purchase a separate powder feeder.
• Smooth powder feed: ensures consistent, quality coatings
• Powder flow control knob: mounted on the gun for convenient powder feed rate adjustment.
• Powder feed trigger: provides simple powder feed start and stop.
• Powder canister bayonet mount: locks the canister on tightly to prevent spills.
• Mounting stud: for machine mounted operation or use as a gun rest during workpiece changeover.
• O-ring seals between nozzle and siphon plug: ensures safe and reliable operation without the risk of backfire and simplifies gun maintenance.
• Choice of air caps: optimizes cooling during spray operations for a variety of coatings.
• Onboard gas valve: for simple oxygen and fuel gas flow start and stop.
• Simple maintenance and hardware changeover: the nozzle and siphon plug assemblies can be easily removed and replaced without additional tools.

Standard Accessories

Air Jet Assembly

If additional workpiece cooling is required or if denser, harder coatings are desirable, the Air Jet Assembly is available. Designed for attachment to the front of the 6P-II gun, it injects high velocity air into the spray stream. Adjustable cooling tubes can be focused towards any part of the spray stream or directly onto the workpiece.

Extension Nozzle

The extensions come in 1 or 2 feet lengths, can be fitted with 80 or 45° angular gas heads. Typical uses are internal diameter or hard to reach coating surfaces. Installation is simple by removing the Air Cap Body and Siphon plug and replacing with the extension. This can be done in about 1 - 2 minutes without tools.
305mm - 1 Feet
610mm - 2 Feet

Additional Information:

• Item Code: 6PMII